D&H DH05C - Page 89

89
Fahrzeug-/Funktionsdecoder ab Firmware-Version 1.11
89
Locomotive/Vehicle function decoder from firmware version 3.12
par
Name and definition Range
Standard
156 Settings (not relevant to PD05A/PD06A)
Bit Function Value
6........Coupling process and timer deactivated ............................64
7........Coupling process only in shunting gear ............................128
0-255 0
160 Conditions for low beam light (see par161) 0-161 0
161
Conditions for LV (not relevant to PD05A/PD06A)
Function Value
Initial state (always on, if function key on )
0
Only forward +1
Only backward +2
Only while standing +3
Only while driving +6
Only at F0 (light) off +9
Only at F0 (light) on +18
Not in shunting gear +27
Only in shunting gear +54
Ignore direction in shunting gear +81
Ignore driving/stand in shunting gear
+108
Ignore direction and driving/stand in shunting gear +135
Always only one number of each definite range may be added up!
0-161 0
162
Conditions for LR
(see par161)
0-161 0
163
Conditions for AUX1 (see par161)
0-161 0
164
Conditions for AUX2
(see par161)
0-161 0
165
Conditions for AUX3 (see par161)
0-161 0