80
Fahrzeug-/Funktionsdecoder ab Firmware-Version 1.11
80
Locomotive/Vehicle function decoder from firmware version 3.12
par
Name and definition Range
Standard
009 Consist address hundreds digit
Currently without function
011
Acceleration time
The value corresponds to the time in seconds from start to maximum speed
and should be set to at least 8 (s. notice in chapter 10.3)
0-255 3
012
Deceleration time
The value corresponds to the time in seconds from the maximum speed to
stop and should be set to at least 8 (s. notice in chapter 10.3)
0-255 3
013
Maximum speed (see supplement 2)
0-127 92
014
Starting voltage
0-15 0
015
Slow approach speed step (see par091)
Only with suitable brake modules
0-127 63
016
Start delay speed step 1 (see par095)
Each 100 ms, 0 = deactivated
0-250 0
017
Speed reduction analog (not relevant to FH*/PD05A)
0 = small reduction … 31 = strong reduction
0-31 15
018
Shunting gear speed (as par013)
0-127 63
019
Shunting gear delay time
(as par011)
0-255 1
021
Brake sections
1 or 2
0, 1 0
022
Consist mode F1-F8
Currently without function
To Next Page
Loading...
