97
Fahrzeug-/Funktionsdecoder ab Firmware-Version 1.11
97
Locomotive/Vehicle function decoder from firmware version 3.12
Please make sure that the function output you have chosen for connecting the electric coupling has a sufficiently high
capacity! We recommend the connections AUX3 and AUX4 of our decoders, which are designed for currents up to 1 A.
Hint:
Use the coupling functions of our decoders (timer for switching off AUX*) to make sure that the function output will be
switched off in any case according to a maximum activation time specified by you. Otherwise the destruction of the electric
coupling is possible.
Refer to automatic coupling prcedure.
To Next Page
Loading...
