USB/TF function (Notice: NTFS format is not supported, please change to FAT32 or FAT format )
How to change the USB flash drive from NTFS format to FAT32 or FAT format?
Click Start > File Explorer > This PC. Right-click your flash drive and then select
Format. In the File System list box, choose FAT, type in a Volume Label if you want,
and then click Start. Click OK to the format warning and wait until the process is
complete.
How to play and recording mp3 to the USB/TF ?
(lift up the tone arm and put it on the Tone Arm Holder position)
Turn on the Power Switch , and Insert your USB or TF card to slot
or
. If USB or TF card
inserted before, press “ M” button till it enters into USB or TF cardmode.
The display will show “-Lod”, then it will display “USB” or “TF”, music will begin to play.
Press the Button
or
to select previous or next track. Press and holdthe Button
or
to fast-forward or fast-backward.
Press button to pause and play music.
Press and hold the button , the display will show “dEL”, and you will hear a beep sound twice ,
the music playing has now been deleted.
Adjust volume by volume control .
FM function
(lift up the tone arm and put it on the Tone Arm Holder position)
Turn on the Power Switch , then press “ M” button till enter into FM mode. Thedisplay will
show “ FM 87.5 MHz” .
Release the FM antenna and adjust the position to get clear sound channels.
Press the button to mute the sound . Press again to restore the sound.
Press and hold the button to automatically search FM radio. The tracks will be saved as P01,
P02, P03 ... when the scanning has finished.
Press the Button
or
to select previous or next track.
Press and hold the Button
or
to previous or next track scan.
Adjust volume by volume control .
To Next Page
Loading...