Par. No. # Parameter description Default value 4-set-up Change during opera-
tion
Conver-
sion index
Type
25-0* System Settings
25-00 Pack Controller [0] Disabled 2 set-ups FALSE - Uint8
25-04 Compressor Cycling [0] Disabled All set-ups TRUE - Uint8
25-06
Number of Compressors 2 N/A 2 set-ups FALSE 0 Uint8
25-2* Zone Settings
25-20 Neutral Zone [unit] 4.00 ReferenceFeedbackUnit All set-ups TRUE -2 Uint32
25-21 + Zone [unit] 3.00 ReferenceFeedbackUnit All set-ups TRUE -2 Uint32
25-22 - Zone [unit] 3.00 ReferenceFeedbackUnit All set-ups TRUE -2 Uint32
25-23 Fixed Speed neutral Zone [unit] 4.00 ReferenceFeedbackUnit All set-ups TRUE -2 Uint32
25-24 + Zone Delay 120 s All set-ups TRUE 0 Uint32
25-25 - Zone Delay 60 s All set-ups TRUE 0 Uint32
25-26 ++ Zone Delay 60 s All set-ups TRUE 0 Uint32
25-27 -- Zone Delay 30 s All set-ups TRUE 0 Uint32
25-3* Staging Functions
25-30 Destage At No-Flow [0] Disabled All set-ups TRUE - Uint8
25-31 Stage Function [0] Disabled All set-ups TRUE - Uint8
25-32 Stage Function Time 15 s All set-ups TRUE 0 Uint16
25-33 Destage Function [0] Disabled All set-ups TRUE - Uint8
25-34 Destage Function Time 15 s All set-ups TRUE 0 Uint16
25-4* Staging Settings
25-40 Ramp Down Delay 10.0 s All set-ups TRUE -1 Uint16
25-41 Ramp Up Delay 2.0 s All set-ups TRUE -1 Uint16
25-42 Staging Threshold ExpressionLimit All set-ups TRUE 0 Uint8
25-43 Destaging Threshold ExpressionLimit All set-ups TRUE 0 Uint8
25-44 Staging Speed [RPM] 0 RPM All set-ups TRUE 67 Uint16
25-45 Staging Speed [Hz] 0.0 Hz All set-ups TRUE -1 Uint16
25-46 Destaging Speed [RPM] 0 RPM All set-ups TRUE 67 Uint16
25-47 Destaging Speed [Hz] 0.0 Hz All set-ups TRUE -1 Uint16
6.2.19 25-** Pack Controller
ADAP-KOOL
®
Drive AKD 102 High Power 6 How to Programme the Frequency Converter
MG.11.O1.02 - ADAP-KOOL
®
is a registered Danfoss trademark
123
6
To Next Page
Loading...
