Danfoss AME 10

© Danfoss | 2019.07
EI.96.L5.1F | 1
ENGLISH
AME 10, AME 11 www.danfoss.com Page 6
DANSK
AME 10, AME 11 www.danfoss.dk Side 7
DEUTSCH
AME 10, AME 11 www.danfoss.de Seite 8
FRANÇAIS
AME 10, AME 11 www.danfoss.fr Page 9
ESPAÑOL
AME 10, AME 11 www.danfoss.es Page 10
SVENSKA
AME 10, AME 11 varme.danfoss.se Sida 11
NEDERLANDS
AME 10, AME 11 www.danfoss.nl Blz. 12
SUOMI
AME 10, AME 11 www.danfoss.fi Sivu 13
POLSKI
AME 10, AME 11 www.danfoss.pl Strona 14
РУССКИЙ
AME 10, AME 11 www.danfoss.ru Страница 15
中文
AME 10, AME 11 www.danfoss.com.cn 第16页
AME 10, AME 11
Operating Guide
AME 10, AME 11 +
VB 2 (DN 15-25)
AME 10, AME 11 +
AVQM (see data sheet)
AME 10, AME 11 +
VMV (DN 15-40)
AME 10, AME 11 +
VM 2 (DN 15-32)
AME 10, AME 11 +
VS 2 (DN 20, 25)

Danfoss AME 10 Specifications

General

Brand	Danfoss
Model	AME 10
Category	Controller
Language	English

Summary

Safety and Installation Overview

Safety Symbols and Conditions

Displays safety symbols for maintenance, operating conditions, and protection ratings.

Mounting and Wiring Diagrams

Illustrates initial mounting steps and basic wiring connections for the actuator.

Control Modes and Wiring

Wiring for Modulating Mode

Details wiring for modulating control signals (voltage or current).

3-Point Floating Mode Wiring (Relay Output)

Explains wiring for 3-point floating control using a controller with relay output.

3-Point Floating Mode Wiring (Triacs Output)

Details wiring for 3-point floating control with a controller using triacs output.

DIP Switch Settings and Signal Types

DIP Switch Configurations

Describes various DIP switch settings for signal input, output, and operating modes.

Product Dimensions

Actuator Dimensions and Specifications

Provides physical dimensions and a table of dimensions for different AME actuator models.

Detailed Operation and Safety

General Safety Notes

Provides essential safety precautions for handling and installing the actuator.

DIP Switch Detailed Functions

Explains the specific function of each DIP switch (SW1-SW9) for actuator configuration.

Function Test and Indicators

Describes how to perform a function test and interpret the indicator LED status.

Hazardous Substances Information

Lists hazardous substances present in actuator components as per GB/T 26572 standard.