Danfoss AME 110

Operating Instructions
6 000 005 891 DEBC 08 / 01 VI.AA.Q1.52
AME 110, AME 113
1 (22)
AME 113, AME 110
ENGLISH
DEUTSCH
Page 2
www.Danfoss.com
Seite 2
www.iwk.danfoss.de
Elektrischer Stellantrieb
AME 110, 113
Pagee 2
www.danfoss.pl
VIM 2
VIU 2
VIS 2
AIQM
Electrical Actuator
AME 110, 113
FRANCAIS
POLSKI
Strona 2
www.danfoss.pl
Si³ownik elektryczny
AME 110, 113
Servomoteur électrique
AME 110, 113
www.danfoss.de

Danfoss AME 110 Specifications

General

Type	AME 110
Supply voltage	24 V AC/DC
Control signal	3-point
Power consumption	2.5 W
Stem force	110 N
Input voltage	24 V AC/DC

Summary

Safety Notes

Safety Function and Effective Direction

Mounting

Permissible Installation Positions

Valve Installation

Actuator and Valve Installation

Mounting Procedure

Step-by-step instructions for mounting the actuator onto the valve.

Electrical Connection

Connection Procedure

Outlines the steps and safety precautions for electrical connection.

Electrical Connection Diagram

Jumper Removal Instruction

Crucial step to remove jumper before connecting AME 113 with safety function.

Mechanical Stroke Setting

Electrical Actuator Settings

Output Signal Setting

Explains how to set the output signal proportional to the actuating stroke.

Input Signal Setting

Signal Value Configuration

Final Positions Setting

VIM 2, VIS 2, AIQM Valve CLOSED Position

Final Positions Setting for VIU 2

Dismounting

Pressure Test

Pressure Test Safety Precautions

Important safety rules for performing pressure tests on the system.

Valve State for Pressure Test