Need help?Do you have a question about the Danfoss PLUS+1 MC012-110 and is the answer not in the manual?
General| Model | MC012-110 |
|---|---|
| Type | Controller |
| Input Voltage | 9-32 V DC |
| Supply Voltage | 9-32 V DC |
| Operating Temperature | -40°C to +85°C |
| PWM Outputs | 4 |
| CAN Interfaces | 2 |
| Protection Rating | IP67 |
| Communication Protocol | CAN |
| Processor | 32-bit |
| Storage Temperature | -40°C to +85°C |
| Number of Inputs | Configurable, up to 12 |
| Number of Outputs | Configurable, up to 6 |
Defines the OEM's full responsibility for consequences arising from Danfoss product installation.
Lists supported input types: digital, analog, temperature, frequency.
Provides AIN specs: middle and high ranges, voltage, impedance.
Details DOUT and DOUT/PVGpw pin specifications, including general and specific parameters.
Covers PWM output operation, modes, specifications, and protection.
Details module supply voltage, current, and sensor power supply ratings.
To Next Page