Need help?Do you have a question about the Danfoss AK-PC 781 and is the answer not in the manual?
General| Type | Controller |
|---|---|
| Category | Refrigeration Controller |
| Power Supply | 24 V AC/DC |
| Analog Inputs | 2 |
| Analog Outputs | 2 |
| Display | LCD |
| Mounting | DIN Rail |
| Protection Class | IP20 |
| Communication | Modbus RTU |
| Output Current | 2 A |
Specifies the controller type and programme version validity.
Outlines the organization of functions and settings within the menu.
Explains how to document controller settings via the print function.
Lists available functions within the AKM menu for settings.
Measured parameters for main settings.
Configuration options for main settings.
Configuration parameters for suction capacity control.
Defines how compressors are controlled (sequential, cyclic, best fit).
Detailed status parameters for compressors.
Measured parameters for high pressure control.
Oil management related measurements.
Settings for oil management and equalization.
Measured parameters for condenser control.
Configuration options for condenser capacity.
Measured parameters for condenser fans.
Measured parameters for heat recovery.
Measured parameters related to alarms.
Configuration of alarm priorities.
Measured values for general alarm inputs.
Settings for alarm delays on digital inputs.
Measured values from thermostats and pressostats.
Configuration for thermostat and pressostat functions.
Measured values from voltage and PI inputs.
Configuration for voltage and PI inputs.
To Next Page