Need help?Do you have a question about the Danfoss AK-PC 530 and is the answer not in the manual?
General| Brand | Danfoss |
|---|---|
| Model | AK-PC 530 |
| Category | Controller |
| Language | English |
Describes the controller's use for capacity regulation of compressors or condensers.
Explains regulation based on pressure and temperature signals.
Lists core functionalities like relays, status inputs, and alarm outputs.
Details how capacity is controlled via pressure signals and zones.
Describes a relay operation sequence where the last relay in is the first out.
Describes a cyclic relay operation to equalize operating times.
Parameters for setting the reference for compressor capacity control.
Parameters for setting the reference for condenser capacity control.
Configures alarm thresholds, delays, and message types.
Selects the primary operating mode for the controller.
Operation and parameter setting via a system unit.
Instructions for operating the controller using external displays.
Details PO setpoint, neutral zone, and reference limitations.
Details PC setpoint, variable reference, and limits.
Defines compressor connections and coupling modes for specific settings.
Manages fan relay assignments for condenser speed control.
Describes conditions that trigger safety cutouts for compressor/condenser.
Explains different modes for PC reference control.
To Next Page
