Need help?Do you have a question about the Danfoss PLUS+1 MC050-120 and is the answer not in the manual?
General| Model | MC050-120 |
|---|---|
| Operating Temperature | -40°C to +85°C |
| Communication Protocol | CAN |
| CAN Ports | 2 |
| Flash Memory | 512 kB |
| RAM | 64 kB |
| Digital Inputs | 8 |
| PWM Outputs | 4 |
| Storage Temperature Range | -40°C to +85°C |
| Protection Class | IP67 |
| Processor | 32-bit |
| Weight | 400 g |
Outlines the OEM's full responsibility for consequences arising from product installation and use.
Lists configurable input pin types for PLUS+1 modules, including Digital, Analog, and Rheostat.
Details analog, temperature, rheostat, and frequency input configurations and specifications.
Covers characteristics of digital, analog, and frequency pins with pull-up/down options.
Describes available output pin types: Digital, Digital/PVG reference power, and PWM.
Outlines CAN 2.0B specifications and port usage for PLUS+1 modules.
Details required resistance for proper CAN bus backbone termination.
Provides guidance on total bus impedance, voltage limits, and shield grounding.
Estimates memory and communication resource usage for expansion modules.
To Next Page