Need help?Do you have a question about the Danfoss PLUS+1 MC024-120 and is the answer not in the manual?
General| Processor | ARM Cortex-M3 |
|---|---|
| Memory (Flash) | 512 KB |
| Memory (RAM) | 64 KB |
| Operating Temperature | -40°C to +85°C |
| Number of I/O Pins | 24 |
| CAN Ports | 2 |
| Digital Inputs | 8 |
| Digital Outputs | 8 |
| Analog Inputs | 4 |
| Analog Outputs | 2 |
| Operating Temperature Range | -40°C to +85°C |
| Protection Rating | IP67 |
| Communication Interfaces | CAN, RS232 |
| Operating Voltage | 9-32 V DC |
Outlines the responsibilities of the Original Equipment Manufacturer.
Lists and describes various types of digital and analog inputs supported.
Lists the different types of output pins available on the modules.
Explains Digital Outputs and Digital/PVG Reference Power outputs.
Describes Pulse Width Modulated and Digital outputs.
Details module supply voltage and maximum current ratings.
Specifies the regulated sensor power supply and ground pins.
Details DEUTSCH connectors and mating connector part information.
To Next Page