Need help?Do you have a question about the Danfoss PLUS+1 MC050-110 and is the answer not in the manual?
General| Weight | 400 g (0.88 lb) |
|---|---|
| CAN Ports | 2 |
| Processor | 32-bit |
| Digital Inputs | 8 |
| Analog Inputs | 4 |
| PWM Outputs | 4 |
| CAN Interfaces | 2 |
| Protection Rating | IP67 |
| Operating Voltage | 8 to 32 VDC |
| Supply Voltage | 8 to 32 VDC |
| Operating Temperature | -40°C to 70°C |
| Communication Protocols | CAN |
| Storage Temperature Range | -40°C to +85°C |
OEM is responsible for all consequences of product installation and use.
Covers Digital, Analog, Temperature, Rheostat, Frequency, CAN shield inputs.
Analog input specifications including voltage ranges and impedance.
Digital (DOUT), DOUT/PVGpwr, and PWM/DOUT/PVGOUT outputs.
Digital outputs that can source up to 3 A, pair limited.
PWM output modes and turn-off energy for inductive loads.
Module supply voltage and maximum current ratings.
Dedicated regulated sensor power supply and ground pins.
Standards for climate, chemical, and mechanical environments.
To Next Page