Par. No. # Parameter description Default value 4-set-up Change during opera-
tion
Conver-
sion index
Type
25-8* Status
25-80 Pack Status 0 N/A All set-ups TRUE 0 VisStr[25]
25-81 Compressor Status 0 N/A All set-ups TRUE 0 VisStr[25]
25-82 Lead Compressor 0 N/A All set-ups TRUE 0 Uint8
25-83 Relay Status 0 N/A All set-ups TRUE 0 VisStr[4]
25-84 Compressor ON Time 0 h All set-ups TRUE 74 Uint32
25-85 Relay ON Time 0 h All set-ups TRUE 74 Uint32
25-86 Reset Relay Counters [0] Do not reset All set-ups TRUE - Uint8
25-87 Inverse Interlock 0 N/A All set-ups TRUE 0 Uint16
25-9* Service
25-90 Compressor Interlock [0] Off All set-ups TRUE - Uint8
25-91 Manual Alternation 0 N/A All set-ups TRUE 0 Uint8
6 How to Programme the Frequency Converter ADAP-KOOL
®
Drive AKD 102 High Power
124
MG.11.O1.02 - ADAP-KOOL
®
is a registered Danfoss trademark
6
To Next Page
Loading...
