1.1.3 Available literature for ADAP-KOOL Drive AKD 102
Danfoss technical literature is available in print from your local Danfoss Sales Office or online at:
http://portal.danfoss.net/RA/Marketing/Product%20Information/AKD102/Pages/default.aspx
1.1.4 Abbreviations and standards
Abbreviations: Terms: SI-units: I-P units:
a Acceleration
m/s
2
ft/s
2
AWG American wire gauge
Auto Tune Automatic Motor Tuning
°C
Celsius
I Current A Amp
I
LIM
Current limit
Joule Energy J = N∙m ft-lb, Btu
°F Fahrenheit
FC Frequency Converter
f Frequency Hz Hz
kHz Kilohertz kHz kHz
LCP Local Control Panel
mA Milliampere
ms Millisecond
min Minute
MCT Motion Control Tool
M-TYPE Motor Type Dependent
Nm Newton Metres in-lbs
I
M,N
Nominal motor current
f
M,N
Nominal motor frequency
P
M,N
Nominal motor power
U
M,N
Nominal motor voltage
par. Parameter
PELV Protective Extra Low Voltage
Watt Power W Btu/hr, hp
Pascal Pressure Pa = N/m² psi, psf, ft of water
I
INV
Rated Inverter Output Current
RPM Revolutions Per Minute
SR Size Related
T Temperature C F
t Time s s,hr
T
LIM
Torque limit
U Voltage V V
Table 1.1: Abbreviation and standards table .
1 How to Read these Operating Instructions ADAP-KOOL
®
Drive AKD 102 High Power
6
MG.11.O1.02 - ADAP-KOOL
®
is a registered Danfoss trademark
1
To Next Page
Loading...
