Danfoss APP 1.5

36
180R9267 / IOM APP 1.5-3.5 Appendices - v04 / 11.2013
Parts list
APP 0.6-43 / APM 0.8-2.9 / APP W 5.1-10.2
10
521B0941 / DKCFN.PC.073.A13.02 / 10.2013
8.
Parts list
APP 3.0 - 3.5
Note:
The parts listed are not sold separately, only in
various kits.
Exploded view, see next page.
180B4153 – Seal set (APP 3.0-3.5) 180B4152 – Cylinder barrel set (APP 3.0-3.5) 180B4151 – Valve plate set (APP 3.0-3.5) 180B4150 – Retainer set (APP 3.0-3.5) 180B4149 – Piston set (APP 3.0-3.5) 180B4134 – Swash plate set (APP 3.0) 180B4135 – Swash plate set (APP 3.5) 180B4136 – Flushing valve set (APP 3.5)
Pos. Qnt. Designation Material
1 1 Housing Duplex / PEEK
2 1 Pin (Ø4x14) AISI 316 x
31 1 Swash plate Super Duplex x x
32 1 Centre bolt Duplex x x
33 1 Pin (Ø6x10) PEEK x x x
61 1 Cylinder barrel Super Duplex / PEEK x
62 1 Spring Duplex x
63 1 Spring guide PEEK x
64 1 Retainer ball Super Duplex x
65 1 Retainer plate Super Duplex x
66 7 Piston Super Duplex / PEEK x
67 1 Key (5x5x20) AISI 316 x
91 1 Port plate Super Duplex / PEEK x
92 1 Valve plate Super Duplex x
93 7 Back-up ring PTFE x x
94 7 O-ring (Ø13x2.0) NBR x x
121 1 Port ange Duplex
122 1 O-ring (Ø83x2) NBR x
123 1 O-ring (Ø40x2) NBR x
124 1 Shaft seal AISI 316 / NBR x
125 1 Mounting ange
Wetted parts: PP
Dry parts: AISI 316L
126 1 Pin (Ø4x9) PEEK x
127 4 Screw (M6x45) AISI 316 x
128 2 Screw (M6x16) AISI 316 x
129 2 Bleeding plug Duplex x
130 2 O-ring (Ø4.5x1.5) NBR x
152 1 Valve cone PEEK x
153 1 Spring Duplex x
154 1 Plug/guide Duplex x
155 1 O -ring (Ø11.11x1.78) NBR x x
Instruction x x x x x x x x