Need help?Do you have a question about the Danfoss ASV-PV Series and is the answer not in the manual?
General| Pressure Rating | PN 16 |
|---|---|
| Actuator Compatibility | Compatible with Danfoss actuators |
| Function | Balancing and flow control |
| Sizes | DN 15 to DN 50 |
| Medium Temperature | -10°C to +120°C |
| Connection Type | Threaded |
| Sealing | EPDM |
| Control Signal | Analog (0-10 V or 4-20 mA) |
Steps 1-4 detail the initial handling and preparation of components, including removal, insertion, and alignment with audible clicks.
Steps 5-8 illustrate the process of replacing springs, involving component removal, tool usage, and spring insertion with rotation.
Steps 1-3 demonstrate the replacement of the setting scale, involving tool use, alignment, and securing with an audible click.
Steps 4-7 cover final adjustments and operations related to the setting scale, including specific angle requirements and calibration.
To Next Page
