Danfoss CET B-RF - Completing Commissioning Steps

16
Step 3 RX1
Press and hold buttons PROG and CH1 until green
LED light  ashes once
Step 4 RX2C
For RX2C repeat steps 2 and 3 for channel 2
Step 5 CET B-RF
Replace the thermostat dial, ensuring the widest end
of the setting line is lined up with the LCD display.
Commissioning
RX1
NOTE: Thermostat now transmits unique identity signal
continuously for 5 mins.
For latest prices and delivery to your door visit MyTub Ltd - 0845 303 8383 - www.mytub.co.uk - info@mytub.co.uk