Room Thermostat
User Guide
Type CFR
Temperature setting
Set room temperature on the thermostat dial.
On the right-hand side of the thermostat is a
function switch with 3 possible settings:
The room temperature will be as set
on the thermostat.
The control system must have a CFZ
programmer, put thermostat switch
into this position to engage the pro-
grammer. The temperature will be as
set on the room thermostat, but in ac-
cordance with the consumption pattern
entered.
The heating pattern in the programmer
can be overridden by moving the
switch to or .
The room temperature will be as set
on the thermostat less a setback of
5°C/9°F.
Limitation of the setting range
Behind the dial for temperature setting are two lock-
rings. These can be moved as shown if the thermo-
stat setting range is to be narrowed.
¹
Warning: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
(70°F)
FCC ID: PGBTYPE-CFR , CAN 3934104209
This device complies with Part 15 of the FCC Rules and
with RSS-210 of Industry Canada:
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Setback
5°C (9°F)
088R0228
To Next Page
Need help?
General
