Need help?Do you have a question about the Danfoss TP9000 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Temperature Control Accuracy | ±0.5°C |
| Protection Class | IP30 |
| Type | Programmable Thermostat |
| Programming | 7-day programming |
| Temperature Range | 5°C to 30°C |
| Battery Type | 2 x AA |
| Power Supply | Battery-powered |
| Installation | Easy installation |
Details of the TP9000's technical specifications for different models.
Guidance on the correct placement height and location for the thermostat and remote sensor.
Details on connecting remote sensors to terminals 5 and 6, with wiring diagrams.
Steps to access the installer advanced programming mode for system configuration.
Describes the default operating times and temperatures included with the thermostat.
Instructions for setting the thermostat's internal clock and calendar functions.
Step-by-step guide to setting the year, month, and day on the thermostat.
Guide on how to adjust the thermostat's time, including 10-minute increments.
Overview of how to modify the thermostat's programmed heating and hot water schedules.
Detailed steps for programming schedules for each day of the week individually.
Instructions for programming separate schedules for weekdays and weekends.
Steps for setting a single program schedule that applies to all days of the week.
Instructions for setting up the holiday mode to maintain frost protection during absences.
To Next Page
