Danfoss TP6000M User Manual

1
User Instructions
TP6000M & TP6000MA Electronic Programmable Room Thermostats
Product Features
• 2 or 4 programmed events each day, set by installer
• 5/2 day programming, provides di erent set of
programmes for weekend
• AM/PM or 24 hour clock display set by user
• Centigrade or Fahrenheit temperature display, set by user
• Mains powered
• Factory pre-set programmes which can be edited by user
• Built-in & remote sensor versions
LCD DISPLAY
Heating Temperature
Event Number
Thermometer Mode Indicator
Temperature Override - Up
Temperature Override - Down
Thermostat Calling for Heat
Main Display
Time or Temperature
Day of week (1 = Monday)
Keyboard
Locked

Danfoss TP6000M Specifications

General

Display	LCD
Power Supply	Battery
Mounting	Wall-mounted
Power Supply Voltage	2 x AA batteries
Switching Current	3A
Accuracy	±0.5 °C
Type	Programmable Thermostat
Temperature Range	5 to 30°C
Time Program	7 days programmable
Battery Type	Alkaline
Wireless System	No
Compatibility	Suitable for Combi Boilers and most Central Heating Systems

Summary

USER PREFERENCES

Clock display

Allows user to switch between AM/PM and 24-hour clock display formats.

Temperature scale

Enables selection between Centigrade and Fahrenheit temperature display modes.

Display actual room temperature

Option to permanently display the current room temperature on the screen.

PROGRAMMING EVENT TIMES AND TEMPERATURES

Setting the time and temperatures events for Days 1-5

Configure daily event times and desired heating temperatures for weekdays (Mon-Fri).

Setting the time and temperatures events for Days 6-7

Configure daily event times and desired heating temperatures for weekends (Sat-Sun).

DAILY USE INSTRUCTIONS

TEMPORARY CHANGES TO PROGRAMMED TEMPERATURES

Temporarily adjust the heating temperature setting for the current or next event.

SELECTING WEEKEND INTO WEEKDAY OVERRIDE

Copy weekend heating programmes into weekdays or cancel this override.

SELECTING THERMOSTAT MODE

Set the thermostat to a permanent mode (e.g., heat only) overriding schedules.

OTHER FEATURES AND FUNCTIONS

DISPLAYING ROOM TEMPERATURE

Switch the display between time and current room temperature.

RESETTING THE THERMOSTAT MEMORY

Restore factory settings, requiring complete re-programming of the thermostat.

SETTING RECORD

View a summary of the programmed event times and temperatures.