TP9000
8
Installer advanced
programming options
TP9000 incorporates a number of advanced features which can be set
by the user. These are accessed via a User Advanced Programming
Mode, please refer to User Advanced Programming in the user
instructions for details (see page 33)
Installer advanced programming options
TP9000 incorporates an additional number of advanced features which
can be set by the installer to improve the operating effi ciency of the
system and where required, to change the user functionality of the
product. These are accessed via an Installer Advanced Programming
Mode. These settings are optional and need only be made if there is a
demand for the enhanced functions.
Service Interval Timer
Instructions on how to access this feature are available from our
customer support desk. Please note these are only issued to boni-fi de
Heating installers.
Entering Installer Advanced Programming Mode
To access the Installer Advanced Programming Mode follow the steps
below:
a) Press and hold
V and PROG for 3 seconds to
enter User Advanced Programming, the display
will change to fi gure opposite.
b) Press and hold
V, Λ and PROG for 5 seconds
to enter Installer Advanced Programming, the
display will change to fi gure opposite.
To Next Page
Loading...
