Danfoss TP9000 - Holiday programme

GB
PL
DANFOSS HEATING 25
Enhanced copy: The enhanced copy function is available in 7 day
mode only. This allows any day to be copied to any other day, or days.
To use the enhanced copy function, go into the event programming
using the PROG button, then:
1) use the DAY button to fi nd the day to be copied from
2) press the COPY button to select the day to be copied from.
When selected, the day should begin to fl ash.
3) use the DAY button to fi nd the day to be copied to
4) press COPY button to copy the selected day
5) repeat steps 3 and 4 to select and copy other days
6) to stop copying, use the DAY button to go back to the
fl ashing day and press the COPY button. The previously
fl ashing day will stop fl ashing to indicate it has been de-
selected.
Holiday programme
The TP9000 is equipped with a holiday mode that enables it to
automatically bring back on the Heating and Hot Water when returning
from holiday. During the period when the unit is in holiday mode,
the Hot Water is turned off , and the central Heating is placed in frost
protection mode
To set up the holiday programme, please follow
the below steps:
a) Press and hold DAY/HOL
b) Use the Λ and V buttons to set the year
c) Use the + button to move to the month.
Use the Λ and V buttons to set the month
d) Use the + button to move to the day. Use
the Λ and V buttons to set the day