TP9000
26
e) To exit and activate the holiday mode press
DAY/HOL once. The display will change,
Heating and Hot Water will be switched
off . The unit will stay in this state until the
programmed return date, at which point it
will resume normal operation.
f) Once in holiday mode, the return modes for both the heating
and hot water can be set. Use the CH/HW button to change
betweenheating and hot water display mode.
g) The Heating set temperature for the duration of the holiday mode
can be adjusted by selecting the Heating display mode with the
CH/HW button and then adjusting the set temperature using the
(image of Up button) and image of Down button) buttons.
h) Holiday mode can be manually ended at any time by pressing the
DAY button
To Next Page
Loading...
