GB
PL
DANFOSS HEATING 3
Please note: This product should only be installed by a qualifi ed
electrician or competent Heating installer, and should be in
accordance with the current edition of the IEEE wiring regulations.
Specifi cation 230V model 24V model
Power supply 230 Vac, ±15%,
50/60 Hz
24 Vac, ±15%,
50/60 Hz
Switching action
2 x SPDT internally linked, Type 1BS
Unit switch rating 230 Vac, 3(1)A 24Vac, 3(1)A
Memory Backup Retained for life of product
Heat Temperature Range
Setting
5°C - 30°C
Factory Set Calendar Clock Automatic Summer/Winter time
change
Remote Sensor Inputs
(‘A’ models only)
Can be set by installer for remote
sensor, limited sensor, window con-
tact, tele-switch or outdoor sensor
Programme resolution ± 1 minute
Timing Accuracy ± 1 minute
Dimensions, mm (W, H, D) 135 x 88 x 32
Design standard EN 60730-2-7 +EN60730-2-9
Control Pollution Situation Degree 2
Rated Impulse Voltage 2.5 kV
Ball Pressure Test 75°C
Product specifi cation
Installation Instructions
To Next Page
Loading...
