Danfoss CP715 Si User Manual

31
Fully Resetting the Unit
If it is necessary to fully reset the unit, excluding the date and
time, follow the instructions below.
1. Press and hold the +1HR and MAN buttons on the left
hand side of the product.
2. Press the RESET button and hold for 3 seconds.
3. Release the RESET button. The display will change to show
the current time.
4. Finally, release both the +1HR and MAN buttons.
The unit is now fully reset and must be re-programmed, see
pages 21-26.
Making a Full Reset
+1HR
MAN
+1HR
MAN
Example

Danfoss CP715 Si Specifications

General

Brand	Danfoss
Model	CP715 Si
Category	Temperature Controller
Language	English