Need help?Do you have a question about the Danfoss DLX 2.0 UL and is the answer not in the manual?
General| Input Voltage | 200-240V |
|---|---|
| Output Voltage | 0-240V |
| Enclosure | IP20 |
| Frequency | 50/60 Hz |
| Protection Class | IP20 |
| Weight | 2.5 kg |
| Phase | 1 |
| Operating Temperature | -10°C to 50°C |
| Efficiency | 95% |
| Cooling Method | Air Cooling |
| Humidity | 5-95% RH, non-condensing |
Covers general preparations for installation and maintenance, emphasizing qualified personnel and local regulations.
Details precautions for mounting and installing the inverter on a suitable site to maintain efficiency.
Guidance on correct electrical connection for safe and reliable PV system operation.
A checklist to help diagnose and solve common inverter failures, such as not feeding power to the grid.
Lists and describes common messages, warnings, and alarms displayed by the inverter during failure.
Safe procedures for switching off and discharging the inverter before performing maintenance or repairs.
Comprehensive technical specifications for the DLX UL inverter series, including AC/DC parameters and environmental data.
To Next Page
