Danfoss DLX 2.0

DLX
Installation Guide
DLX 2.0 - DLX 2.9 - DLX 3.8 - DLX 4.6
MAKING MODERN LIVING POSSIBLE
SOLAR INVERTERS

Danfoss DLX 2.0 Specifications

General

Protection Class	IP20
Operating Temperature	-10°C to +40°C
Humidity	5 - 95% RH, non-condensing
Altitude	Up to 1000m above sea level
Storage Temperature	-25 - 65 °C

Summary

2. Installation

2.1 Safety and Equipment Requirements

Safety precautions and required equipment for installation.

2.2 Mechanical Installation

Mounting the inverter, including bracket and attachment.

2.3 Pre-Installation Checks

2.4 Electrical Connections

Procedures for connecting DC, AC, and network interfaces.

2.4.1 DC Connections (PV)

Wiring PV modules, stringbox, and grounding.

2.4.2 AC Connections (Grid)

Connecting the inverter to the AC power grid.

2.4.3 Network and Communication

2.5 Checks before Start Up

Comprehensive checklist before the inverter is powered on.

3. Start Up

3.1 Initial Start and Configuration

Procedures for the first-time startup and initial configuration.

3.1.1 Inverter Settings Customization

3.1.3 Installation Configuration Steps

Detailed sequence of steps for initial installation configuration.

3.1.3.2 Advanced Configuration

6. Troubleshooting

6.1 Failure Checklist

Basic troubleshooting steps for common inverter failures.

6.2 Event Log and Errors

9. Technical Data