Danfoss DLX 2.0 User Manual

4 Installation Guide DLX series L00410622-01
1. Product Overview
This Installation Guide contains all the necessary install information to connect and start up
the DLX inverter. The inverter must be used in compliance with the DLX User Guide, which is
to be found at www.Danfoss.com.
1.1. Symbols Used
The warning symbols used in this Installation Guide highlight important information on
how to avoid shock hazards to equipment and persons. Pay particular attention when
the symbols appear!
Table 1.1: Warning symbols appearing in this guide
Symbol Description
DANGER: Situations where an immediate hazard could cause serious injury or
death to workers and/or the general public if not avoided.
WARNING: Situations where a potentially hazardous condition exists that could
result in the death or serious injury of workers and/or the general public if not
avoided.
CAUTION: Situations where a non-immediate or potential hazard presents a
lesser threat of injury that could result in minor or moderate injuries to workers
and/or the general public.
NOTICE: Situations where a non-immediate or potential hazard presents a risk
to damage of property and equipment. May be used to indicate important
operational characteristics. There is no Safety Alert or attention symbol present in
this situation.
1.2. Product Label
The product label contains important identification parameters and characteristics for the
inverter, and must be clearly visible after installation.
Figure 1.2.1: Product Label

Danfoss DLX 2.0 Specifications

General

Brand	Danfoss
Model	DLX 2.0
Category	Inverter
Language	English