Danfoss ECL Comfort 300 Quick Guide

Remove tape on the back.
Position on inside of
ECL Comfort cover.
ECL Comfort 300 / 301
C14, C60, C62, L62
VI.7C.F4.02
2006.12
*087R8251*
*VI7CF402*
–A
–B
–C
–1
–2
–3
–4
A
B
C
Arrow
buttons
change display
(move between
the lines on the
ECL Card)
Shift button moves
between items in the
display
Minus and plus
buttons adjust values
or time
Mode selector changes
the mode of operation
Circuit
selector
changes
between
circuits I and II
Selecting mode
Manual operation
Scheduled operation
Comfort temperature
Setback temperature
Standby
Push to change the
mode of the controller
The arrow indicates comfort
or setback temperature
mode during scheduled
operation
Adjusting the temperature
of the current mode
Outdoor
temperature
Room
temperature
913-
20
Desired temperature
Push to adjust up
or down
Adjusting the temperature
of the opposite mode
Hold down while adjusting
with minus / plus buttons
ECL Comfort 300 / 301 quick guideECL Comfort 300 / 301 quick guide Temperature / Mode selectionTemperature / Mode selection
*087R8251*
*VI7CF402*
Remove tape on the back.
Position on inside of
ECL Comfort cover.
ECL Comfort 300 / 301
C14, C60, C62, L62
VI.7C.F4.02
2006.12
–A
–B
–C
–1
–2
–3
–4
A
B
C
Arrow
buttons
change display
(move between
the lines on the
ECL Card)
Shift button moves
between items in the
display
Minus and plus
buttons adjust values
or time
Mode selector changes
the mode of operation
Circuit
selector
changes
between
circuits I and II
Selecting mode
Manual operation
Scheduled operation
Comfort temperature
Setback temperature
Standby
Push to change the
mode of the controller
The arrow indicates comfort
or setback temperature
mode during scheduled
operation
Adjusting the temperature
of the current mode
Outdoor
temperature
Room
temperature
913-
20
Desired temperature
Push to adjust up
or down
Adjusting the temperature
of the opposite mode
Hold down while adjusting
with minus / plus buttons

Danfoss ECL Comfort 300 Specifications

General

Power Supply	24 V AC/DC
Display	LCD
Protection Class	IP20
Application	Heating, cooling, and ventilation systems
Controller Type	Programmable
Inputs	Analog and digital inputs
Outputs	Analog and digital outputs
Operating Temperature	0°C to +50°C
Storage Temperature	-20 to +70 °C
Relative Humidity	10 - 90 % RH