Need help?Do you have a question about the Danfoss ECL Comfort 300 and is the answer not in the manual?
General| Power Supply | 24 V AC/DC |
|---|---|
| Display | LCD |
| Protection Class | IP20 |
| Application | Heating, cooling, and ventilation systems |
| Controller Type | Programmable |
| Inputs | Analog and digital inputs |
| Outputs | Analog and digital outputs |
| Operating Temperature | 0°C to +50°C |
| Storage Temperature | -20 to +70 °C |
| Relative Humidity | 10 - 90 % RH |
Important safety instructions for installation and operation.
Guidance on creating a system diagram for installation planning.
Explanation of the guide's structure and how to navigate it.
Guides on selecting the correct system diagram for configuration.
Describes three methods for mounting the controller unit.
Details wiring for 230V AC and 24V AC connections.
Instructions for sensors, room panels, and ECL Card insertion.
How to navigate and modify settings using the ECL Card.
Procedure for setting the controller's current time and date.
Viewing temperatures and operating the system manually.
Adjusting heat curve, cut-out, and flow temperature limits.
How room temperature affects the heating system's performance.
A checklist to ensure the controller is ready for use.
Steps to configure the controller based on the specific heating system.
Overview of ECL Card settings for both circuits.
Detailed list and explanation of various service parameters.
Guide to accessing and modifying extended service parameters.
Configuration of parameters related to room control, boost, and optimization.
Settings for flow temperature influence, optimization, total stop, and valve exercise.
Return temperature limitations and their influence on flow temperature.
Settings for DHW/heating parallel operation and closed valve mode.
Parameters for heat meters, heating OFF dates, and override inputs.
Settings for auto tuning, motor protection, time changeover, and master/slave addresses.
How to copy settings and application data using the ECL Card.
Explanation of key terms and concepts used in the manual.
Addresses common issues like incorrect time, lost ECL Card, and temperature problems.
Highlights benefits like personal settings backup and unauthorized operation prevention.
How to monitor, add, or remove comfort periods in the schedule.
Understanding symbols and selecting operational modes like Scheduled or Manual.
Adjusting desired temperatures for comfort and setback modes.
Selecting preferred display modes (A, B, or C) for circuits I and II.
General advice and overview on operating the controller.
Guidance on how to effectively use the ECL Comfort User's Guide.
To Next Page
