Due to different fl oor constructions it
is possible to choose a maximum fl oor
temperature (Mt) in the fl oor which
cannot be exceeded.
The temperature range is 20ºC to 50ºC.
Turn to choose maximum fl oor tem-
perature, and press ...
Please note !
Maximum fl oor temperature is preset
from the factory to 45ºC for cable
temperature safety.
Local building regulations must be observed, when chang-
ing the maximum preset temperature.
For wooden fl oor constructions Danfoss recommend to
limit the temperature to maximum 27ºC.
Max. temperature setting for different fl oor constructions !
Tiles on chipboard 27°C
Carpet/vinyl on chipboard 35°C
Wooden fl oors (parquet, plank, etc.) 27°C
Other (concrete, screed, etc.) 45°C
17
To Next Page
Loading...
