Need help?Do you have a question about the Danfoss ECtemp Next Plus and is the answer not in the manual?
General| Voltage | 220 - 240 V |
|---|---|
| Temperature range (T-T) | -10 - 60 °C |
| Temperature control range | 5 - 45 °C |
| Power source | AC |
| Power consumption (standby) | 2 W |
| Product color | White |
| Memory function | - |
| Housing material | Plastic |
| Smart thermostat | Yes |
| International Protection (IP) code | IP30 |
Weight and Dimensions| Depth | 16 mm |
|---|---|
| Width | 86 mm |
Details operational voltage, standby power, relay specifications, and sensor types.
Provides essential safety guidelines for installation and operation, including precautions for wooden floors.
Instructions on how to switch the thermostat ON and OFF using the top button.
Guide to specifying initial settings when the unit is first activated.
Details how to set up a timer-controlled program for automatic comfort and energy saving.
How to adjust the desired temperature using the < or > buttons and steps of 0.5°C.
Instructions for adjusting time, weekdays, hours, and minutes for timer settings.
How to enable and release the safety lock feature using M and > buttons.
Procedure to enter Away mode, change temperature, and exit the mode.
Steps to display and check the current floor temperature.
Instructions to switch power OFF/ON and select Room temperature control mode.
Steps to extend the maximum floor temperature limitation to 45°C.
To Next Page