Need help?Do you have a question about the Danfoss 088U0212 and is the answer not in the manual?
General| Brand | Danfoss |
|---|---|
| Model | 088U0212 |
| Category | Thermostat |
| Language | English |
Details components on the front of the CF-RD Room Thermostat, including selector and push button.
Explains the different operational states indicated by the LED on the thermostat.
Describes the components on the back of the thermostat, such as the back plate and mounting points.
Steps to activate the installation mode on the Master Controller using its buttons and LEDs.
Procedure to put the Room Thermostat into installation mode for pairing with the Master Controller.
How to choose and confirm the desired output assignment on the Master Controller.
How to interpret the LED status for successful or failed thermostat installation.
Explains the meaning of various icons displayed on the thermostat's digital screen.
Instructions on how to adjust the desired room temperature using the thermostat's controls.
How to set and manage minimum and maximum temperature limitations for the room.
Steps to start a wireless transmission test for the Room Thermostat.
Interpreting LED indicators for successful or failed transmission link tests.
Advice on resolving issues where the Room Thermostat cannot connect to the Master Controller.
Guidance on selecting the best location for installing the room thermostat to ensure accurate readings.
Step-by-step instructions for physically mounting the thermostat using screws.
Steps to initiate the uninstallation process on the Master Controller.
Procedure for removing the thermostat's assigned output from the Master Controller.
To Next Page
