Danfoss 102E7 User Manual

Installation and User Guide
Danfoss Heating
102E7
7-Day electronic mini-programmer
for controlling hot water and heating
(Including Factory Replacement Units FRU)

Danfoss 102E7 Specifications

General

Switching Voltage	230V AC
Power Supply	230V AC
Mounting	Wall Mounted
Voltage	230 V AC
Temperature Range	5°C to 30°C

Summary

Installation Instructions

Product Specification

Technical specifications for the 102E7 programmer.

Installation Guide

Step-by-step instructions for installing the 102E7 unit.

Wiring Diagrams

Electrical connection diagrams for the 102E7 unit.

Replacement Compatibility

Guide for replacing older timers with the 102E7.

User Instructions

Programmer Overview

Overview of the 102E7 mini-programmer's functions.

Performing a Full Reset

Procedure to reset the unit to factory defaults.

Display and Time Settings

Setting the display format and correct time/day.

Preset Programme Details

Information on the unit's default programmes.

Accepting Preset Times

How to confirm and activate factory preset times.

Changing Preset Programmes

Steps to change or create custom heating programmes.

7-Day Programming Mode

Guide for setting up a 7-day heating schedule.

5/2 Day Programming Mode

Guide for setting up a 5/2 day heating schedule.

Running Your Programme

How to operate the 102E7 in its active modes.

Temporary User Overrides

How to temporarily adjust the heating schedule.

Battery Backup Functionality

Explanation of the battery backup feature.

Troubleshooting and Support

Contact details for assistance and problem resolution.