15
Before you change the preset programmes
Your installer will have set your unit to operate in one of the
following modes:
• 7 day - di erent settings for each day of the week (page
16-17) - default setting
• 5/2 day - one set of programmes for weekdays and another
for weekends (page 18-19)
Please follow the correct instructions to programme your unit.
Please Note
The unit must be programmed in sequence and ON/OFF
times cannot be set out of sequence.
If you want to leave a preset time as it is, simply press NEXT
ON/OFF to move on to the next setting
Your clock will allow you to programme 3 ON/OFF settings
per day. If you do not wish to use one of the ON/OFF settings,
simply programme the ON time to be the same as the OFF
time and the setting will not operate.
If at any time you get confused and need to reset your timings
to the standard preset programme, press the R/S button to
return to the preset programmes.
!
!
Changing the preset programmes
To Next Page
Loading...
Need help?
General
