Need help?Do you have a question about the Danfoss TP5001 series and is the answer not in the manual?
Guidance on accessing cables and wiring the TP5001 models.
Instructions for correctly installing batteries into the thermostat.
Details on wiring remote sensors and RX receivers.
Configure temperature limits, ON/OFF functions, and control cycles.
Set temperature override, relay states, events per day, and operating modes.
Manage site/thermostat references and calibrate temperature bias.
Define remote sensor types and configure digital input switch types.
General| Display | LCD |
|---|---|
| Power Supply | 230V AC |
| Mounting | Wall-mounted |
| Protection Class | IP30 |
| Ambient Temperature | 0°C to 45°C |
| Type | Electronic Room Thermostat |
| Temperature Range | 5°C to 30°C |
| Programming | 5/2 day programming |
| Control Mode | On/Off |
| Switching Current | 3 A (resistive) |
| Accuracy | ±0.5°C |
To Next Page
