Danfoss TP5000 + RF User Manual

TP5000 + RF
GB
F
D
ES
DK
NL
G
LT
P
I
Installation Instructions
User Instructions
Instructions d’installation
Instructions d’utilisateur
Installationsanweisungen
Inbetriebnahme-Instruktion
Instrucciones de instalación
Instrucciones del usuario
Instruktions vejledning
Brugervejleding
5/2 day programmable electronic room thermostat
Installatie handleiding
Instructiesevoor Gebruik
Ïäçãßåò åãêáôÜóôáóçò
Ïäçãßåò ÷ñÞóçò
Instrukcja instalacji
Instrukcja Użytkownika
Montavimo instrukcijos
Informacija Vartotojui
Istruzioni per l’uso
Istruzioni per l’utente

Danfoss TP5000 + RF Specifications

General

Type	Programmable Room Thermostat
Display	LCD
Power Supply	2 x AA batteries
Radio Frequency	868 MHz
Frost Protection	Yes
Backlight	No
Communication	Wireless (RF)
Number of Programs	6 programs per day
Wireless Range	30 meters (indoors)
Temperature Control Accuracy	+/- 0.5°C
Programming	7-day or 5/2-day programming

Summary

Installation Instructions

Product Specification

Detailed technical specifications for the TP5000 and TP5000-RF thermostats.

Mounting and Positioning

Instructions for removing the wallplate and fixing the thermostat at the correct height.

Thermostat Wiring

Wiring diagrams for the thermostat unit (excluding RF models).

RF Receiver Wiring

Wiring diagrams for the RF receiver units (RX1, RX2, RX3).

RF Commissioning

Procedure to tune the RF receiver to the thermostat signal frequency.

User Instructions

Preset Programme Overview

Overview of default heating schedules for weekdays and weekends.

Setting Clock and Day

Guide to setting the current time and day, with a note on daylight saving.

Changing Preset Schedules

How to change weekday and weekend event times and temperatures.

Temporary Overrides

Using overrides for temporary temperature changes or weekend programme mode.

Frost Protection and Battery

Setting frost protection mode and instructions for replacing low batteries.