Programming the unit - 7-day mode
1. Press PROGRAMME until
SET ON TIME appears at the
top of the display and press
DAY until MO appears at the
bottom of the display.
Use the + and - buttons to
set the time you want your
heating to rst come on in
the morning (Event 1).
2. Press NEXT ON/OFF to move
to Event 2.
Either press COPY to use
the same settings as the
day before or continue to
programme the central
heating ON and OFF times,
using the + and - buttons to
set the time you want and
pressing the NEXT ON/OFF
button to move to the next
setting.
3. Press DAY button once only.
TU will appear at the bottom
of the display.
Programming the heating & hot water in 7-day
mode
To Next Page
Loading...
Need help?
General
