1. Press PROG until SET ON
TIME appears at the top of the
display and press DAY until
MOTUWETHFR appears at the
bottom of the display.
Use the + and - buttons to set
the time you would like your
heating/hot water to rst come
on in the morning (Event 1).
2. Press NEXT ON/OFF once only.
Use the + and - buttons to set
the time you want your heating/
hot water to go o (Event 2).
To move to the next setting,
i.e. when you would like your
heating/hot water to come on
again (Event 3) press the NEXT
ON/OFF button again.
3. Continue programming the
heating/hot water ON and OFF
times for weekday Events 4, 5 &
6 as in Step 2.
4. Press the DAY button once and
SASU will appear at the bottom
of the display.
Programming the heating & hot water in 5/2 day
mode
Programming the unit - 5/2 day mode
To Next Page
Loading...
