Danfoss ECtemp Next Plus User Manual

Danfoss ECtemp Next Plus
Installation Guide14
4�5 Timer Setting
To adjust time and week day - press
Use < or > to adjust hours,
Press again to shift to minutes and use < or > for adjust-
ing3
Press again to shift to weekdays and use < or > for select-
ing right day
Finish timer setting by pressing any other button or wait for
automatic exit after 6 sec. without operation
4�6 Safety Lock
Press M and > simultaneous to enable Safety lock.
To release safety lock press M and > simultaneous again.
4�7 Away Mode
Press M to get into Away mode
is showed in the display
Changing the desired temperature in Away mode
Press < or >.
SET is showed in the display
Adjustment in steps of 0.5°C
Press M to exit Away mode again

Danfoss ECtemp Next Plus Specifications

General

Voltage	220 - 240 V
Temperature range (T-T)	-10 - 60 °C
Temperature control range	5 - 45 °C
Power source	AC
Power consumption (standby)	2 W
Product color	White
Memory function	-
Housing material	Plastic
Smart thermostat	Yes
International Protection (IP) code	IP30

Weight and Dimensions

Depth	16 mm
Width	86 mm