Thermostat EFIT 550 ONLY:
The fi rst function to choose in the
basic setting is whether Thermostat
EFIT 550 must operate Alone or as
Master or Slave thermostat.
If several thermostats are linked in one
network, only one of the thermostats
can be choosen as Master !
For further information about network
and Master/Slave, see section on
page 24.
Turn to choose Alone (ALO), Master
(MAS) or Slave (SLA), and press ...
Please note !
If Slave is chosen, not all settings in
the Basic Setting will appear.
The settings left out can be set from
the Master unit.
14
To Next Page
Loading...
