Danfoss EKC 102A User Manual

RI8KJ35J 08-2010
084R9974
INSTRUCTIONS
EKC 102A (115 V)
084R9974
Type: Pt 1000 (1000 Ω /0°C ) /
Ptc 1000 (1000 Ω /25°C ) /
NTC-M2020 (5000 Ω / 25°C)
( o06)
t
amb
= 0 - +55°C
115 V a.c. 50/60 Hz
1.0 VA
CE (250 V a.c.) UL (240 V a.c.)
10 (6) A
16 A relays
10 A Resistive
5FLA, 30LRA
UL-approval based on 30000 couplings
10 V < U < 256 V
Max. load must be keept.

Danfoss EKC 102A Specifications

General

Brand	Danfoss
Model	EKC 102A
Category	Control Unit
Language	English

Summary

Instructions Overview

Product Identification and Specifications

Details the EKC 102A model, sensor types, voltage, power, and environmental ratings.

Physical Dimensions and Installation Data

Presents the physical dimensions and mounting information for the EKC 102A unit.

User Interface Navigation

Explains button operations, menu access, and temperature setting procedures.

Controller Modes and Indicators

Covers manual operations, LED status lights, and alarm handling.

Parameter Configuration

Provides a comprehensive list and explanation of all operational parameters for system setup.

Diagnostic Codes and Status

Details status codes and fault codes for system monitoring and troubleshooting.

Factory Reset and Safety Precautions

Guides on restoring factory settings and essential safety advice for compressor protection.