Danfoss EKC 102B User Manual

RI8JU767 09-2009
084R9966
INSTRUCTIONS
EKC 102B,
EKC 102C
084R9966
Type: Pt 1000 (1000 Ω /0°C ) /
Ptc 1000 (1000 Ω /25°C ) /
NTC-M2020 (5000 Ω / 25°C)
( o06)
t
amb
= 0 - +55°C
230 V a.c. 50/60 Hz
1.5 VA
EKC 102B
EKC 102C
*) AU:
Guld, Gold or Oro
l = max. 15 m
*)
*)
*)
*)
*) AU:
Guld, Gold or Oro
l = max. 15 m
CE (250 V a.c.) UL (240 V a.c.)
10 (6) A
16 A relays
10 A Resistive
5FLA, 30LRA
UL-approval based on 30000 couplings
10 V < U < 256 V
Max. load must be keept.

Danfoss EKC 102B Specifications

General

Control type	On/Off
Digital inputs	2
Hysteresis	Adjustable
Protection class	II
Input type	Pt 1000
Relay output	SPDT
Relay outputs	1
Enclosure rating	IP65
Type	Electronic Controller

Summary

User Interface and Basic Operations

Navigating the Set Menu

Instructions on using buttons to navigate and select parameters within the device's menu.

Setting the Temperature

Procedure for adjusting the temperature value using the device's buttons.

Manual Defrost Control

Guide on how to manually initiate or stop a defrost cycle using the device's buttons.

Status Indicator Light

Information regarding the function and behavior of the device's light-emitting diode.

Viewing Alarm Codes

Instructions on how to briefly press the upper button to view alarm codes.

Device Start-up Procedure

Description of how the regulation starts when voltage is applied to the device.

Parameter Configuration and Codes

Alarm Code Display

Overview of the different alarm codes and their meanings for device diagnostics.

Fault Code Display

List of fault codes and their corresponding descriptions for controller errors.

Status Code Display

Explanation of status codes indicating the current operational state of the device.

Factory Settings and Reset

Returning to Factory Settings

Procedure to restore the controller to its original factory-set values.