Danfoss EKC 102C User Manual

RI8JU453 10-2005
084R9966
INSTRUCTIONS
EKC 102B,
EKC 102C
084R9966
Type: Pt 1000 (1000 Ω /0°C ) /
Ptc 1000 (1000 Ω /25°C ) /
NTC-M2020 (5000 Ω / 25°C)
( o06)
U: 10 V < U < 256 V
I
max
(AC-1) = 10 A (Derated 16 A relay)
(AC-15) = 6 A
t
amb
= 0 - +55°C
230 V a.c.
1.5 VA
EKC 102B
EKC 102C
*) AU:
Guld, Gold or Oro
l = max. 15 m
*)
*)
*)
*)
*) AU:
Guld, Gold or Oro
l = max. 15 m

Danfoss EKC 102C Specifications

General

Temperature Range	-50 to +150 °C
Display Type	LCD
Digital Inputs	1
Enclosure Rating	IP65
Protection Class	II
Hysteresis	Adjustable
Type	Electronic Temperature Controller
Sensor Type	NTC

Summary

The Buttons and Operation

Set Menu Operation

Step-by-step guide for navigating and modifying controller parameters via the set menu.

Temperature Setting

Procedure for adjusting the temperature set point using the controller buttons.

Viewing Other Temperature Sensors

Instructions on how to display readings from additional temperature sensors connected to the controller.

Manual Defrost Control

Method for manually initiating or stopping a defrost cycle using button presses.

Status Indicators

Explanation of the light emitting diode (LED) states and their meanings, including alarms.

Alarm Code Reference

Guide to understanding and interpreting alarm codes displayed by the controller.

Alarm and Status Code Display

Alarm Code Display

List of alarm codes (A1, A2, A4, A61) and their corresponding descriptions for troubleshooting.

Status Code Display

List of status codes (S0, S2, S3, S10, S11, S14, S17, S20, S25, S32) and their operational meanings.