20
1. Press PROG until SET CH
ON TIME appears at the
top of the display and MO
appears at the bottom of
the display.
Use the + and - buttons to
set the time you want your
heating to fi rst come on in
the morning (Event 1).
2. Press NEXT ON/OFF to
move to Event 2.
Continue programming the
central heating ON and
OFF times in this way by
using the + and - buttons
to set the time you want
and pressing the NEXT
ON/OFF button to move to
the next setting.
3. Press DAY button once
only. TU will appear at the
bottom of the display.
Programming the heating in
7 day mode
Programming heating - 7 day mode
To Next Page
Loading...
