22
Programming heating - 24 hour mode
1. Press PROG until SET CH
ON TIME appears at the top
of the display.
Use the + and - buttons to
set the time you want your
heating to fi rst come on in
the morning (Event 1).
2. Press NEXT ON/OFF to
move to Event 2.
Continue programming the
central heating ON and
OFF times by pressing:
a) NEXT ON/OFF button to
move to the next setting,
b) + and - buttons to amend
the time
3. Press the PROG button to
return the unit to RUN mode
(time appears & colon in the
display begins to fl ash)
4. Proceed to page 23.
Programming the heating in
24 hour mode
To Next Page
Loading...
