23
Programming hot water
To set the hot water programme
press the PROG button until
SET HW ON TIME appears on
the display.
Set the hot water programme
in the same way as the heating
programme, using:
a) + and - buttons to alter the
time
b) pressing the NEXT ON/OFF
button to move to the next
setting
c) pressing DAY to advance
through days of the week
(7 day mode) or to advance
to Saturday and Sunday
programming (5/2 day mode).
Finally press PROG to return the
unit to run mode (time appears
& colon in the display begins to
fl ash).
Programming the hot water
To Next Page
Loading...
