Instructions
6 | AN18658643414604-001701 - 118U3276G
© Danfoss | Climate Solutions | 2022.02
rements-for all above mentioned condensing
units Eco-design DIRECTIVE 2009/125/ EC,
establishing a framework for the setting of Eco-
design requirements for energy-related products.
REGULATION (EU) 2015/1095, implementing Eco-
design Directive 2009/125/EC with regard to Eco-
design requirements for professional refrigerated
storage cabinets, blast cabinets, condensing
units and process Chiller.
• Condensing unit measurements are made
according to standard “EN 13771-2:2017” – Com-
pressor and condensing units for refrigeration-
performance testing and test methods- part 2:
Condensing units.
17 - Warranty
Always transmit the model number and serial
number with any claim filed regarding this pro-
duct.
The product warranty may be void in following
cases:
• Absence of nameplate.
• External modifications, in particular, drilling,
welding, broken feet and shock marks.
• Compressor opened or returned unsealed.
• Rust, water or leak detection dye inside the
compressor.
• Use of a refrigerant or lubricant not approved
by Danfoss.
• Any deviation from recommended instructions
pertaining to installation, application or main-
tenance.
• Use in mobile applications.
• Use in explosive atmospheric environment.
• No model and serial number transmitted with
the warranty claim.
18 – Disposal
Danfoss recommends that condensing
units and oil should be recycled by a sui-
table company at its site.
To Next Page
Loading...
Need help?
General
