678 Configure Control Card
(CONFIG CONTROL CARD)
Value:
Standard version (STANDARD VERSION) [1]
Profibus 3 Mbaud Version (PROFIBUS 3 MB
Ver.) [2]
Profibus 12 Mbaud Version (PROFIBUS 12
MB Ver.) [3]
Function:
This parameter enables a configuration of a Profibus
control card. The default value depends on the pro-
duced unit, which is also the maximum obtainable
value. This means that a control card can only be
downgraded to a lower performance version.
VLT
®
2800 Series
MG.27.A2.22 - VLT
®
is a registered Danfoss trademark 97
Programming
To Next Page
Loading...
